Thanks For Contacting Us.

SS 904L

SS 904L Stockiest
  • SS 904L

    904L is a high-alloy austenitic stainless steel with low carbon content. The grade is use under severe corrosive conditions. It has been application proved over many years now and was originally developed to resist corrosion in dilute sulfuric acid. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion.

    Hot Working

    Hot work should proceed after uniform heating to 2000-2200 F. Does not work the material at less than 1800 F. Full annealing should follow any hot work to re attain maximum ductility and corrosion resistance.

    Cold Working

    Although higher forces are required, 904L will respond in a similar fashion to other austenitic stainless steels like 304, 316 or 317. Most common operations can be successfully performed.

    Chemical Composition

    C Cr Cu Mn Mo Ni P S Si
    Max Max Max Max Max
    0.02 19.0-23.0 1.0-2.0 2.0 4.0-5.0 23.0-28.0 0.045 0.035 1.0

    Mechanical properties

    Grade Tensile Strength (MPa) Yield Strength 0.2% Elongation (% in 50mm) Hardness
      min Proof (MPa) min min
    Rockwell B (HR B) Brinell (HB)
    904L 490 220 36 70-90 typical 150