Alloy Steels are basically carbon steels with certain chemical elements added to improve the properties of the metal for specific applications or end products. Alloying elements include carbon, copper, sulfur, manganese, phosphorus, and chromium, and the resulting material is called an alloy steel. Uttam Steel India provides alloy steel in all mill forms including sheet, strip, plate, foil, round bar, square bar, flat bar, hex bar, tube, pipe and wire.
Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.
Also, when the surface is scratched this layer quickly reforms. This phenomenon is called passivation by materials scientists, and is seen in other metals, such as aluminium. When stainless steel parts such as nuts and bolts are forced together, the oxide layer can be scraped off causing the parts to weld together.
Duplex stainless steels are called "duplex" because they have a two-phase microstructure consisting of grains of ferritic and austenitic stainless steel. The picture shows the yellow austenitic phase as "islands" surrounded by the blue ferritic phase. When duplex stainless steel is melted it solidifies from the liquid phase to a completely ferritic structure. The result is a microstructure of roughly 50% austenite and 50% ferrite.
Duplex Stainless Steels, also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite. These steels have a duplex microstructure which contributes to their high strength and high resistance to stress corrosion cracking. Due to their high content of chromium, nitrogen and molybdenum, duplex steels offer good resistance to local and uniform corrosion. Duplex stainless steels have good weldability.
arbon steel, also called plain-carbon steel, is steel where the main alloying constituent is carbon. The term "carbon steel" may also be used in reference to steel which is not stainless steel; in this use carbon steel may include alloy steels.
Carbon Steel is a malleable, small amounts of manganese, iron-based metal containing carbon, and other elements to make the material useful for many different applications. Carbon steels are the base metals widely used in manufacturing today around the world in nearly every industry, aircraft, including aerospace, automotive, chemical, and defense.
Alloy Steels are basically carbon steels with certain chemical elements added to improve the properties of the metal for specific applications or end products. Alloying elements include carbon, copper, sulfur, manganese, phosphorus, and chromium, and the resulting material is called an alloy steel. All Metals & Forge provides alloy steel in all mill forms including sheet, strip, plate, foil, round bar, square bar, flat bar, hex bar, tube, pipe and wire.
Alloy steel is steel alloyed with a variety of elements in total amounts of between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is somewhat arbitrary: Smith and Hashemi define the difference at 4.0%, while Degarmo, define it at 8.0 %. Most commonly, the phrase "alloy steel" refers to "low alloy" steels.
ABRASION RESISTAN 200/400/450/500 wear-resistant steel. has a hardness of approximately 200/400/450/500 HB. It combines high wear resistance with toughness and good weldability. Brand name supplied by us are of TISCRAL / SAILHARD/ JISCRAL/ LAS07 / HARDOX / DILLIDUR / DUROSTAT / ABRASO / XAR AND Other well know brands.